background image

PEARLabel® 400iXL UsER’s GUidE 

6

  

WaRning

When handling the auto cutter

Do not touch the tape outlet slot (where the labels come out) 

during printing or when the auto cutter is in operation, otherwise 

there is a risk of injury.
Do not use or store the printer, AC adapter, power cable, USB 

cable, tape or ribbon cartridges in the following places: 

• In direct sunlight
• Where it may become extremely hot such as a vehicle with windows closed, near a 

heater or an exhaust duct of an air conditioner.
• Where the printer may get wet due to a shower or rain such as in a bathroom or 

outdoors.
• In a dusty place or where the printer may be exposed to smoke or stream such as 

near the kitchen or the humidifier.
• On an unstable place such as a shaky table or an inclined plane.
• Where it might be subjected to vibration or shock.
• Near high voltage power lines or something that generates a magnetic field.

notice 

Packaging

Keep the plastic bags used to contain the printer or this manual 

out of reach of children. Children may suffocate if they swallow 

them or put their heads into the bags.
Do not touch the plug during thunderstorms.

Recycle cardboard and packaging based on local regulations. 

Thank you!

Содержание PearLabel 400iXL

























Отзывы: