K-Star K1035, Руководство по эксплуатации

Страница: 6 / 10

6
PREPARE THE HOOD
Outside Exhaust
1. Install the vent into the duct connector of the cooker hood with 4 screws (
ST4*8
).
2. Fix the Aluminum Flex Duct on the vent.
INSTALL THE HOOD
1) The cooker hoods shall be placed at a distance of 24”-30” of the cooking
surface for best performance. See Pic 1.
b) Drill a hole in the cupboard, make sure the hole edge to the cupboard
edge at least 35mm distance.,see Pic 2.
c) Remove the GU10 light, see Pic 3.
c)Take down the filter and remove the 2 screws on the panel,see Pic 4.
d) Use 8 ST4*18 screws to tighten screws fix the hood into cabinet,
and fix the panel and light again, see Pic 5.
e) Install one-way valve: put the one-way valve into air outlet,
Put on the one-way valve with air outlet.
PiC 2
Pic 1 PiC 1