2) The timer key is the timer setting key when the motor is working. If only press Lamp key, the timer key
is null and void.
A) Press timer key, enter the setting display. 1
st
time setting is 5 min. Use speed key for increase
gradually, use lamp key for decrease gradually, the time should be set 1:00—60:00 min. Finish setting,
press timer key to confirm.
B) Example: Let the setting time be 5min, the display is 5:00, 4:59, …00:1, with 0:00 displays per
minute, and once “00: 00” appears, the motor position and the indicator power supply will be cut off
automatically, (the display screen displays “24-hour system”, the output is blocked up, and the soot
machine enters standby status, and the backlight will be put out automatically 30 seconds later.)
When use time setting next time, press timer key and not change timer setting, the soot machine will
keep the time automatically . 5 min later, it starts to decrease gradually. If reset the time, it will work for
new time.
HALOGEN BULBS
ALWAYS
SWITCH
OFF
THE
ELECTRICITY
SUPPLY
BEFORE
CARRYING OUT ANY OPERATIONS
ON THE APPLIANCE.
To change bulbs:
1. Use a screwdriver to pull out the
lampshade and get off the glass.
CAUTION:
BULB
MAY
BE
HOT,PLEASE ROTATE WHEN THE
BULB IS COOL!
2. Replace with a Type JC, 12Volt,
20Watt Max, G-4 Base bulb. Do not
touch replacement bulb with bare
hands! If the bulb is touched with the
bare hand, it should be cleaned with a
lint-free cloth moistened with methylated spirit.
3. Fix the glass and lampshade back the the light after replacing the bulb.
WARRANTY
We will warrant this product free from defects in material and quality for one year and motor for
5 years. If any problems occur from correct usage, please contact the service department for
under warranty service.
This warranty does not cover the following:
The filter mesh and bulb.
Commercial use.
Amendment of the date of manufacture on the rating plate.
Damaged caused to the body by usage of detergent sprayer.
Pollution made to the led parts, glass parts and S/S parts.
Incorrect installation, misuse, abuse or neglect.
Incorrectly fitted to insufficient or unsuitable power.
Taken apart or serviced by unauthorized service engineers or replaced with other manufacture’s
components.
For commercial use the maintenance and free service should be discussed with our authorized
agent.
Beyond the 12 month limited warranty period, the purchaser should pay for charge of
components and call out.
In the event of a service call, please provide the warranty card and receipt of date of purchase.