INSTALL THE HOOD
Note: at least two people will be required to mount the
hood.
1. Raise the hood into its mounting position.
2. Align the rectangular opening on the back of the hood with
the wall-mounting bracket. Gently lower the hood until it
securely engages the bracket.
3. Open the Baffle filter and find the two
φ
6 mm holes on
the back of the hood. Level the hood with 2 mounting
screws (4*30mm). Use drywall anchors provided.
4. Put the glass in the lead way, use four screws (4x25mm)
with glass washer and rubber washer to fix the glass.
(Note: the screws and washers should be install as
shown.)
5. Measure the height of the glass to the slidery duct fixing
support. Adjust the height of the chimney according to the
height. Then use the duct fixing support with two screws
(4x8mm) to fix the chimneys. Shown as in the pic.
6. Put the chimney on the hood, use two screws(4x8mm)to
fix the chimney to the slidery duct fixing support.