K-RAIN MANUFACTURING CORP.
1640 Australian Avenue
Riviera Beach, FL 33404 USA
PH: 1-561-844-1002 / 1-800-735-7246
FAX: 1-561-842-9493
www.krain.com
© K-RAIN Manufacturing Corp.
Part Number: 30006101 Rev 1
3
MODEL
#7215
MODEL
#7202
MODEL
#7201
MODEL
#7201-J
ELECTRIC
VALVES
INSTALLATION INSTRUCTIONS
SPECIFICATIONS
• Standard solenoid: 24 VAC
• Pressure range: 6-200 psi
• Voltage: 24 VAC, 60 Cycle, .43 Amps Inrush, .25 Amps Holding
BEFORE INSTALLATION
1.Flush system thoroughly before installing valves.
2.Make sure you have sufficient water supply, pressure & flow.
INSTALLING VALVE WITH ADAPTERS
1.Wrap adapters with 2 or 3 complete wraps of Teflon tape around threads.
2.Hand tighten adapters into valve.
3.Carefully tighten the adapters one additional turn past hand tight.
4.Do not use flow control handle as a lever.
CAUTION: DO NOT OVER-TIGHTEN ADAPTERS!
OPERATING VALVE MANUALLY
1.Turn solenoid on/off handle 180 degrees counter-clockwise to open valve.
2.Turn solenoid on/off handle 180 degrees clockwise to close valve.
3.Solenoid on/off handle must be fully closed for proper valve operation.
Pro Series
