background image

HR-2800 

 

28 MHZ AM-FM 
AMATEUR RADIO HF TRANSCEIVER 

 

OWNER'S MANUAL 

 

NOTICE ! 

It is recommended to carefully read this owner’s manual before using the product. This will also help to prevent illegal use of the 
radio in violation of the regulations valid in the country where the product is used, as well as to avoid causing possible interferences 
to other services. 

 

Index

 

1

 

Introduction - Content of the packaging

  

Controls and operation

 

 2 - 9 

CTCSS function

  

 10 

Installation

  

11 

Specifications - User Information

  

14 

ESP Compander Diagram - CTCSS Diagram

  

II 

PCB - Main Board & CPU Board

 

 III - IV 

Diagram

 

V - VI 

Block Diagram

  

VII-VIII 

 

NOTICE ! 

This transceiver has been factory programmed, in order to use the product immediately after purchase. The programming includes 
the activation of frequencies in the HF 10 Meter Amateur Band, according to the technical rules in force for the use of this bands. 
The manufacturer is not responsible for any modification to the harware or software of the product, which may possibly cause the 
radio 

 

Congratulations ! 

Congratulations for selecting and purchasing a K-PO quality product. K-PO HR-2800 is a 10-Meter band Amateur Radio transceiver 
using advanced hardware and software design. This transceiver includes a number of advanced functions and systems, therefore it 
is definitely necessary to carefully read this owner’s manual before using the radio. With a correct use of the product in accordance 
with the operating method described in this manual, the product will offer a trouble free use for many years. K-PO is constantly 
engaged to develop and provide quality products meeting the customers requirements, however any suggestion or comments on this 
product that might help us to improve quality are warmly welcome.  

 

Content of the packaging 

Please check that all the following items are contained in the packaging : 

 

Main unit (transceiver) 

 

DC power cord with fuse holder and fuse 

 Dynamic 

microphone 

 

Car mounting bracket 

 

Car mounting bracket accessories (hardware, knobs, etc.) 

 Microphone 

bracket 

 Owner’s 

manual 

 

 

 
 

Содержание HR-2800









Отзывы: