K-array Vyper Series, Руководство пользователя

Страница: 7 / 20

5
Quick Start Guide
Vyper-KV25 / Vyper-KV52 single-unit Setup
Follow these instructions to properly install the loudspeaker:
1. Unpack the loudspeaker and set the accessories aside
for later use;
2. Find the proper position on the mounting surface and
mark the location;
3. Set the proper cable length for connecting the
loudspeaker to the amplifier;
4. Connect the cable to the flying connector at the
loudspeaker end: see Connecting, p. 9;
5. Set the proper loudspeaker load impedance with
respect to the amplifier in use: see Impedance
Settings, p. 9;
6. Select the type of installation:
• Installation with Reclosable Fastener Adhesive, p. 6;
• Installation with Brackets, p. 6;
• Installation without Brackets, p. 7;
With respect to the type of installation selected and
the actual mounting conditions, you may be requested
to plug the flying connector to the loudspeaker before
steadily fixing the loudspeaker to the surface.
7. Once the loudspeaker is connected and affixed to
the surface, set the connection with the amplifier: see
Connecting the Amplifier, p. 10;
8. Switch on the music and enjoy!
Multiple Vyper-KV52 Line Array Setup
Follow these instructions to properly install the loudspeaker:
1. Unpack the loudspeakers and set the accessories
aside for later use;
2. Find the proper position on the mounting surface and
mark the location;
3. Set the proper cable length for connecting the first
loudspeaker of the array to the amplifier;
4. Connect the cable to the flying connector at the
loudspeaker end: see Connecting, p. 9;
5. Set the proper loudspeaker load impedance with
respect to the amplifier in use: see Impedance
Settings, p. 9;
6. Prepare the jumper wires for joining the loudspeakers
and connect the loudspeakers to each other: see
Connecting Multiple Vyper-KV52, p. 9;
7. Mechanically join the loudspeaker in line array: see
Joining Multiple Vyper-KV52, p. 8;
8. Select the type of installation:
• Installation with Reclosable Fastener Adhesive, p. 6;
• Installation with Brackets, p. 6;
• Installation without Brackets, p. 7;
With respect to the type of installation selected and
the actual mounting conditions, you may be requested
to plug the flying connector to the loudspeaker before
steadily fixing the loudspeaker to the surface.
9. Once the loudspeakers are connected and affixed to
the surface, set the connection with the amplifier: see
Connecting the Amplifier, p. 10;
10. Switch on the music and enjoy!
Vyper
User Guide