K-array KU212, Руководство пользователя

Страница: 12 / 13

KU212 Ver. 1.0
12
11. TEChNICAL SPECIFICATIONS
ACOUSTICS
Power handling 700 W
Impedance 4 / 16 Ω selectable (2 x 8 Ω )
Frequency range (-10 dB) 35 Hz – 150 Hz
(1)
SPL 1W/1mt 100 dB
(2)
Maximum SPL 124 dB (cont.) – 130 dB (peak)
(3)
COVERAGE
Horizontal omni
Vertical omni
CROSSOVER
Type External crossover required
Frequency Low pass @ 150 Hz
TRANSDUCERS
Type 1 x 12” neodymium magnet woofer with 2” voice coil
Type 1 x 12” passive transducer
POWER AUDIO IN/OUT
Connectors 1 x 4-pin phoenix connector
Wiring Serial or parallel
RECOMMENDED AMPLIFIERS
Type KA24, KA84
CERTIFICATION
IP 54 (More complete water protection with K-KUIP accessory)
PHYSICAL
Dimensions 65.0 cm x 33.0 cm x 20.0 cm (25.8“ x 13.0” x 7.9“)
Weight 18.5 kg (40.8 lbs)
Notes for data
1. With dedicated preset;
2. Measured @4 mt then scaled @1 mt;
3. Measured with musical signal
New materials and design are introduced into existing products without previous notice.
Present systems may differ in some respects from those presented in this catalogue.
The contents of this manual are furnished for informational purposes only. K-array s.u.r.l. assumes no responsibility for any errors or inaccuracies that may
appear in this manual. K-array s.u.r.l. reserves the right to make modifications without prior notice.