K-array Kommander-KA, Руководство пользователя

Страница: 12 / 28

Kommander-KA
User Guide
12
Loudspeakers Wiring
In order to set the proper connections with the loudspeakers,
a set of euroblock PC 4/4-ST-7,62 flying connectors are
provided.
Each PC 4/4-ST-7,62 flying connector features four terminals
designed to be connected to a couple of loudspeaker cables
(carrying two wires each). Be sure to observe the correct
polarity at both the loudspeaker and amplifier cable ends.
When connecting multiple loudspeakers in parallel to the
same amplifier’s output channel, make sure the total nominal
impedance doesn’t lower under the amplifier minimum
recommended load impedance.
Minimum
Load
Power Rating per channel at
minimum load
Kommander-KA14 I 2 Ω 600 W @ 2Ω
Kommander-KA34 4 Ω 750 W @ 4Ω
Kommander-KA104 4 Ω 2500 W @ 4Ω
Kommander-KA18 4 Ω 150 W @ 4Ω
Kommander-KA28 2 Ω 600 W @ 2Ω
Kommander-KA68 4 Ω 750 W @ 4Ω
Kommander-KA208 4 Ω 2500 W @ 4Ω
Input Wiring
Kommander-KA amplifiers accept balanced input signals. Only
high quality balanced, screened, twisted pair audio cables with
metal XLR connectors should be used.
IN: Line input audio connector.
Male XLR plug and female XLR chassis connector. Pinouts:
1. ground
2. hot
3. cold.
LINK (4-channel amplifiers only): audio connector phisically
paralleled to the corresponding input connector.
Female XLR plug and male XLR chassis connector. Pinouts:
1. ground
2. hot
3. cold.
The amplifier input sensitivity is set to accept
input signal at +4 dBu reference level.
1
1
3
3
2
2
XLR-M plug
Flying connector
screw terminals
XLR-F plug