K-array Capture-KMC50, Руководство пользователя, Страница: 11 / 20

9
Connect the MiniXLR to the K-PREMC02
preamplifier.
Connecting
The Capture-KMC50 microphone needs the 48V phantom
power supply.
4
Use only the K-PREMC02 preamplifier for powering
multiple microphone units.
K-array assumes no liability for any damage
caused by a defective power supply.
Always mute the sound reinforcement system
before switching on the power supplies
Use only high quality 5V
DC
, 500mA power supply
for guarantee pristine audio.
A further 5V
DC
500mA power supply unit (not provided)
is needed to guarantee proper microphone operating.
The auxiliary DC power supply can be connected to the
K-PREMC02 preamplifier either via a MicroUSB connector or
using a XLR connector.
When the phantom power
is supplied, the LED on the
K-PREMC01 preamplifier lights up.
When more than one Capture-
KMC50 microphone unit
is employed in line array
configuration, the K-PREMC02
preamplifier must be used AND
a further DC power supply must
be connected to the K-PREMC02
preamplifier.
Capture-KMC50
User Guide
External 5 V, 500 mA
power supply unit
(not provided)
MicroUSB
Phantom
Power ON