K-array Azimut Series, Руководство пользователя

Страница: 8 / 24

6
Sitting people
H: min height 1,5 m (5 ft) / max height 2,5 m (8¼ ft)
D: min distance: 2,5 m (8¼ ft)
Standing people
H: min height 1,7 m (5⅔ ft) / max height 2,7 m (9 ft)
D: min distance: 2,5 m (8¼ ft)
TV screens or displays
Setup
Lyzard and Vyper loudspeakers perform best when
positioned on a planar surface such as a wall.
Find the proper installation height, aiming the loudspeaker at
the listening position. We suggest the following configurations:
Lyzard wirings
Lyzard loudspeakers are already pre-wired with 5 m (16.4 ft)
of ultra-thin speaker cable to be directly connected to the
K-array Kommander-KA02 power amplifier.
Before connecting the loudspeaker cable to the amplifier:
• insure the amplifier’s minimum loading impedance
is matched, especially when connecting multiple
loudspeakers in parallel (see next paragraph);
• insure that the amplifier is switched off.
In case of cable replacement, for a cable run of up to 5 m
(16.4 ft) use wire gauge of 0,5 mm
2
(24 AWG) at least.
For longer cable runs a wider gauge is recommended.
In order to screw the terminals of the Lyzard loudspeakers,
use 2 mm (5/64 in) standard (flat-blade) screwdriver.
The Lyzard’s ultra-thin speaker cable
should not be cut, jointed or soldered .
Instead of altering the wiring, replace the cable.
Loudspeaker Wirings
Cables with proper terminal connectors are provided within
the package: follow the hardware configuration section for
setting the connections.
Azimut
User Guide
H
H
D
D