JYTEK PXIe-63985 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 40

background image

18

3 Driver Installation

After installing the operating system, all related drivers must be installed for correct system

operation. This section describes drivers needed for Windows operating systems and the

procedures to install them. For other OS support, please contact JYTEK.

3�1 Installing Windows Drivers

1. Fully install Windows, which contains most standard I/Odevice drivers

2. Install the chipset driver
3. Install the graphic driver

4. Install the Ethernet driver
5. Install the GPIB driver

6. Install the management engine driver

7.  Install the PXI trigger driver
8.  Install the USB 3.0 driver
9.  Install the SMBus driver

10.Install the RST driver

3�2 Installing the Chipset Driver

This section describes installation of the chipset driver for PXIe-63985. The chipset driver

directs the operating system to configure the Intel® QM87 chipset components.

To install the chipset driver:

1. Close any running applications
2. Insert the JYTEK All-in-One USB Flash Driver (x: denotes the USB driver)

◦ The Win7 32-bit chipset driver is located in the directory: x:\Driver Installation\

PXI Platform\PXI controller\PXIe-63985\Win7_32bit\Chipset\

◦ The Win7 64-bit chipset driver is located in the directory: x:\Driver Installation\

PXI Platform\PXI controller\PXIe-63985\Win7_64bit\Chipset\

3. Execute setup.exe and follow on-screen instructions tocomplete the setup
4. Reboot the system

3�3 Installing the Graphics Driver

To install the graphics driver:

1. Close any running applications
2. Insert the JYTEK All-in-One USB Flash Driver (x: denotes the USB driver)

◦ The Win7 32-bit graphics driver is located in the directory: x:\Driver Installation\

PXI Platform\PXI controller\PXIe-63985\Win7_32bit\Graphics\

«
...
22
23
24
25
26
...
»

Содержание PXIe-63985









































Отзывы:

Нет отзывов

Похожие инструкции для PXIe-63985

Бренд: OmarLift Страницы: 14

Бренд: Mamas & Papas Страницы: 16

Бренд: Danfoss Страницы: 7

Бренд: Fagor Страницы: 10

Бренд: Fagor Страницы: 358

Бренд: Fagor Страницы: 556

Бренд: Fagor Страницы: 172

Бренд: Fagor Страницы: 180

Бренд: Fagor Страницы: 112

Master Control Unit

Бренд: FaderMate Страницы: 36

Бренд: Oceanic Systems Страницы: 8

Бренд: Paradox Страницы: 32

Бренд: Patron Страницы: 17

IntelliZone2 MasterStat

Бренд: Water Furnace Страницы: 44

Бренд: L-Acoustics Страницы: 20

Бренд: DigiPower Страницы: 27

Бренд: asalvo Страницы: 46

Бренд: AUMA Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды