JYTEK PCIe-6301 Series Скачать руководство пользователя страница 62

Страница: 62 / 62

PCIe/PXIe-6301 Series |

jytek.com

| 57

Statement

The hardware and software products described in this manual are provided by JYTEK China, or JYTEK

in short.

This manual provides the product review, quick start, some driver interface explaination for

PCIe/PXIe-6301 family of temperature sensor data acquisition cards. The manual is copyrighted by

JYTEK.

No warranty is given as to any implied warranties, express or implied, including any purpose or non-

infringement of intellectual property rights, unless such disclaimer is legally invalid. JYTEK is not

responsible for any incidental or consequential damages related to performance or use of this

manual. The information contained in this manual is subject to change without notice.

While we try to keep this manual up to date, there are factors beyond our control that may affect the

accuracy of the manual. Please check the latest manual and product information from our website.

Shanghai Jianyi Technology Co., Ltd.

Address: Room 201, Building 3, NO.300 Fangchun Road, Shanghai.

Post Code

：

201203

Tel

：

021-5047 5899

Website

：

www.jytek.com

Содержание PCIe-6301 Series































































Результаты поиска

Содержание PCIe-6301 Series

Отзывы:

Похожие инструкции для PCIe-6301 Series

Бренды по названию

Популярные бренды

JYTEK PCIe-6301 Series, Руководство пользователя

Результаты поиска

Содержание PCIe-6301 Series

Отзывы:

Похожие инструкции для PCIe-6301 Series

Бренды по названию

Популярные бренды