Portable MP3 CD Radio Cassette Recorder V10M10_IM_EN_11152007
www.jWIN.com
- 11 -
OPERATIONAL INSTRUCTIONS
Audio CD Playback-continued
PROGRAM MODE-continued
3. Press
the
CD
PLAY/PAUSE BUTTON
once to start
the program playback and the CD play Indicator “
”
will light up.
4.
To check the program you have stored after complete
programming, press the
PROGRAM BUTTON
once
during CD stop mode, then press the
CD
SKIP/SEARCH
BUTTON
once, The
LCD
DISPLAY
will show the first programmed track number. Repeat
above procedure to read all the programmed memory.
5.
To cancel the programmed memory:
•
During the CD stop mode, press the
CD STOP BUTTON
once, or
•
Open
the
CD DOOR during
the CD stop mode.
The Program Indicator will disappear from the
LCD
DISPLAY
.
MP3 CD Playback
1. When
the
CD DOOR
is closed and an MP3 disc is
inside, the total number of the tracks in the disc will
show on the
LCD
DISPLAY
and will enter the Stop
mode. The
DISC
indicator will always show on the
LCD
DISPLAY
when the JX-CD483D is in MP3 CD
mode
.
2.
When no disc is loaded, the
LCD
DISPLAY
will show “
” and remain in Stop mode.
3.
If the CD DOOR is not closed, the DISPLAY will show “
”.
PLAY/PAUSE MODE
1. When
the
PLAY/PAUSE BUTTON
is pressed during
CD stop mode, the first track will be played. The
Play Indicator “
” will light. The
MP3
Indicator will
show as well to indicate MP3 Disc is playing. The
LCD
DISPLAY
will show the specific track number being played.
2.
MP3 music can be stored on a CD Disc with or without folders depending on your MP3
burning method. To select specific musical tracks inside an MP3 disc, follow these
instructions:
a.
If an MP3 disc is downloaded without dividing into folders, all track numbers will be
shown directly on the
LCD DISPLAY
. The Album number will only show
after
pressing the
FOLDER BUTTON
.
b.
If music is stored into different folders, select the specific Album number first by
pressing the
FOLDER UP/DOWN (+/-) BUTTON
. Press the
CD
SKIP/SEARCH
or
SKIP/SEARCH
BUTTON
to select the Track number inside this Album.
