JVC XL-PM1 страница 6 Скачать руководство пользователя

Страница: 6 / 23

XL-PM11/XM-PM1

1-6

Prior to performing the following procedure, remove
the cabinet -door, cabinet -middlet and CD
mechanism.

Remove the screw

attaching the EXT battery

termial board, and remove the main board with the
EXT battety terminal board.

Removing the main board & EXT battery
terminal board (See Fig.6)

Prior to performing the following procedure, remove
the cabinet -door and cabinet -middle.

Disconnect the harness(motor) from connector
CON2(MOW000) on the main board .

Disconnect the flexible board(pick-up) from
connector CON1 on the main board and remove the
CD mechanism.

ONE POINT :

Removing the CD mechanism (See Fig.5)

Solder the short-circuit land on the
flexible board, before the flexible
board is removed from connector
OCN1 on the main board.

When reassembling, unsolder the
short-circuit land on the flexible
board after connecting the flexible
board.

Flexible board is bonded with a
couple-face tape on the bottom
cabinet.

Prior to performing the following procedure, remove
the cabinet -door and cabinet -middle.

Remove the eight screws

attaching the metal

cover (Peel off the warning label if necessary).

Remove the metal cover and system control board.

Disconnect the flexible board from connecter CON4
on the system control board.

Removing the system control board
(See Fig.7a and 7b)

Flexible board

Short-circuit

land

CON1

(Note : See page 1-4)

Fig.5

Fig.6

Fig.7a

Fig.7b

CON2

(MOW000)

CD mechanism

Main board

Cabinet -bottom

(inside)

Cabinet -bottom(inside)

EXT battery terminal board

Main board

Flexible board

CON1

Cabinet -door (inside)

Cabinet -door (inside)

Metal cover

System control

board

(Display board)

CON4

Flexible board

Attention

Содержание XL-PM1
























Результаты поиска

Содержание XL-PM1

Отзывы:

Похожие инструкции для XL-PM1

Бренды по названию

Популярные бренды

JVC XL-PM1, Руководство по обслуживанию

Результаты поиска

Содержание XL-PM1

Отзывы:

Похожие инструкции для XL-PM1

Бренды по названию

Популярные бренды