66
<Recorder Part> Applications
This section describes procedures to register user(s) of
Smart Client and configure the rights of each user.
Adding a User
The following is the procedure to configure the settings with
the [Configure User Access...] wizard. You may also
configure the settings from [Users] in [Advanced
Configuration].
1
Click [Configure User Access...]
2
Click [Next]
3
Configure server access settings
4
Click [Next]
The user type (basic user or Windows user) setting
screen appears.
Set the standard user which uses the viewer (Smart
Client).
5
Enter the user name and password and click [Add
Basic User]
The user is registered as a new user.
Configuring Smart Client
User Settings
Item
Description
Server name
For specifying the name to identify this unit
in the network.
Local port
For specifying the port number to use for
the server.
Character
encode
(language)
Make sure to set to [Western European
(ISO) (iso-8859-1)].
Enable
internet
access
Select this check box when connecting a
surveillance computer to the unit through
the internet.
When selected, specify the global IP
address of the router or firewall in the
internet access field, and the port number
for access of the surveillance computer in
the internet port field.
