JVC VR-N1600E, Инструкция по эксплуатации

Страница: 78 / 136

70
Applications
Auto Detect Setting
This section enables you to assign an IP address to each camera and configure various auto detect settings.
For procedures on using the Auto Detect feature, refer to [Auto Detect Settings] (
A
Page 100).
Main Menu List (continued)
A
B
C
E
D
F
G
Item Preset Values Description Reference
Page
A
IP Lease
䢇
Enable
Disable
For configuring the function to assign IP addresses to each
network camera.
Memo :
●
In order to assign an IP address of the network camera
using the IP Lease feature, you need to enable the DHCP of
the network camera. For procedures to enable the DHCP of
the network camera, refer to the [INSTRUCRTIONS] of the
network camera.
●
If a network uses a multiple number of VR-N1600U/E units,
enable the [IP Lease] only for one unit. Select
A
Disable
B
if a
DHCP server is operating on the same network. When the
[IP Lease] is enabled for two or more devices at the same
time, the IP address may change to a static address, and
cause malfunction of the cameras.
A
Page 100
VR-N1600_J.book Page 70 Wednesday, August 8, 2007 3:32 PM