Settings
There are three screens in Auto Patrol.
(The screen below appears when [Auto Patrol 0] is
clicked.)
.
* Setting values with
R
are default values.
No.
Switches the camera image from No. 0 to 99 in
sequence.
Title
This displays the title of the position.
Position
This sets the position number to be moved in
sequence.
[Set values: 0 to 99]
Memo :
0
Specify the setting for Preset Position in [PTZ
Settings] of Built-in Viewer.
Stay Time
This sets the duration of displaying the images at
each position.
For positions that you do not want to display during
Auto Patrol, set to “Skip”.
[ Set values: Skip,
R
10, 20, 30, 45, 60, 120]sec
Moving Speed
This item sets the speed of moving to the preset
position.
[Set values: Low, Mid,
R
High]
[Privacy Mask] Page
Privacy Mask is a feature that enables masking of
a portion of the video image.
You can set 8 rectangular privacy masks for this
unit.
This page can be used during access using
“admin” or “operator”.
0
Click [Advanced Settings] in the side menu, and
click [Privacy Mask].
0
Press the [OK] button to enable the new
settings.
0
If the distribution capability of the camera is
exceeded when images are acquired from the
camera by the Built-in Viewer or other clients,
images may not appear on the [Privacy Mask]
page. Stop the Built-in Viewer or other clients
before using the [Privacy Mask] page.
P87 [Exiting Built-in Viewer] )
0
If the [OK] button is pressed upon entering an
invalid value, a warning message will appear
and the entry will be denied. Press the [Cancel]
button to restore the invalid entry to the value
before the change was made.
Note :
0
When the setting page for privacy mask is
opened, zoom will be at the Wide end and [Auto
Flip] is set to “OFF”.
0
You cannot apply a mask to a zoomed image.
0
The size of the preset mask changes with the
zoom ratio.
Settings
.
* Setting values with
R
are default values.
[Advanced Settings] Page -[Auto Patrol] Page
57
Se
tti
ng
Us
in
g In
ter
net
E
xplor
er
