JVC V.NETWORKS VN-C3WU, Инструкция по эксплуатации

Страница: 37 / 44

37
The input of an alarm a few seconds after a previous alarm has been input
can be set separately as a relay alarm.
Relay Alarm Input
On/Off ------------- Set to On when alarm output is to be used; set to Off when
alarm output is not to be used.
Setting Items ---- Sets the signal to be output from the Alarm Output jack.
- Momentum output
Sets the time during which alarm output is to continue.
- Output value
Sets either the High signal or Low signal as the alarm output.
- Initial output at power on
Sets whether or not to output an alarm signal one time from the
VN-C3WU alarm output when the power is turned on,
Set the output in accordance with the device which will receive the alarm.
After setting the alarm, always make sure that alarm operation is normal.
Alarm Out
VM-C3WU_E.65J
00.10.12, 7:13 PM Page 37
Adobe PageMaker 6.5J/PPC