background image

 

Operating Notes 

 

Operating Conditions 

 

Avoid viewing very bright objects (example, light fixtures, sunlight) for extended periods. 

 

Avoid operating or storing the unit in the following locations: 

  Extremely humid, dusty, hot/cold environments where the operating temperature is outside the 

recommended range of 14°F to 122°F (-10°C to +50°C) 

  Installation in a place exposed to direct sunlight 

  Close to sources of powerful radio or TV transmitters 

  Close to fluorescent lamps or objects reflecting light 

  Under unstable light sources (may cause flickering) 

  In a place with vapor or oil, for example in a kitchen. 

  In a place at which corrosive gases are emitted. 

  Near a source of radiation, X-rays, strong radio waves or magnetism. 

  In a place, such as vehicle installation, which is subject to vibration. 

  In a place with excessive dirt. 

 

Do not install in an environment where there is cold air or near the air outlet of an air conditioner.   

The front cover may become foggy as a result of sudden temperature changes. 

 

Under light source containing much infrared rays like a Filament lamp or halogen light, color may look 

faded.  

 

Due to side effect of AES, there may be a case that LED traffic signal or LED electric sign become 

difficult to see. 

 

Due to limitation of AES and the maximum shutter speed (1/28000), there may be a case over exposure 

occurs on bright objects. 

 

Handing Precautions 

 

Do not suspend yourself from this camera, shake it or hang objects over it. 

 

Applying excessive load may cause the camera to fall off and cause an accident. 

 

Copyright Protection 

 

With the exception of the user being the copyright holder or when permission such as for duplication has 

been granted by the copyright holder, permission is required in principle for the duplication, modification, 

or transmission of copyrighted material. 

 

Unauthorized duplication, modification, or transmission of copyrighted material may constitute a 

copyright infringement, and the user may be liable to compensate for any damages. When using 

copyrighted material, be sure to check the license agreement of the copyrighted material thoroughly. 

 

When rights or rights holders are involved with regard to the targeted duplicating subject, permission 

may be required for shooting or using (processing) it. Be sure to check the licensing conditions 

thoroughly. 

 

Disclaimer 

 

Difficult to see. 

We will not be responsible for any inconveniences or disturbances caused in the event of privacy 

invasion as a result of camera footages of this product. 

 

Saving Energy 

 

If the camera is not going to be used for a long period of time, turn off the power or the system for        

safety reasons and to conserve energy. 

Содержание TK-T8100WPRE













Отзывы: