JVC TK-T2100RE, Инструкция по эксплуатации

Страница: 8 / 12

8
①
②
③
2.3 Mounting the Camera
1. Attach the mounting template to the wall or ceiling.
2. Drill two holes, then insert the screw anchors
①
into the holes.
3. Secure the bottom case to the wall or ceiling with the TP4 x 15 mm tapping screws supplied
②
.
Recommendation:
To prevent the camera from falling off, we suggest tightening a safety wire
③
to a firm place (ceiling slab or
wall). This safety wire is not supplied.
Note
Depending on the material of your mounting surface, you may require different screws and
anchors than those supplied.
F
IGURE
2.2 M
OUNTING THE
C
AMERA
Please tighten a
safety wire on a firm
place as photo.
1. Screw anchors (x2), supplied.
2. TP4 x 15 tapping screws (x2),
supplied
3. Safety Wire (fall prevention wire,
not supplied)