background image

2

For USA and CANADA

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION :

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral triangle
is intended to alert the user to the presence of impor-
tant operating and maintenance (servicing) instruc-
tions in the literature accompanying the appliance.

The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product's enclosure that may be of sufficient magni-
tude to constitute a risk of electric shock to persons.

Information for USA
This device complies with Part 15 of the FCC Rules.
Changes or modifications not approved by JVC could void
the user's authority to operate the equipment.

WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.

AVERTISSEMENT:
POUR EVITER LES RISQUES D'INCENDIE OU
D'ELECTROCUTION, NE PAS EXPOSER
L'APPAREIL  A L'HUMIDITE OU A LA PLUIE.

FEATURES ......................................................................... 2

OPERATING PRECAUTIONS ............................................. 3

SAFETY PRECAUTIONS ................................................... 3

CONTROLS, CONNECTORS AND INDICATORS .............. 4

INSTALLATION ................................................................... 5

CONNECTIONS .................................................................. 8

HOW TO USE THE FERRITE CORE .................................. 9
MENU SETTINGS ............................................................. 10
Menu operations ............................................................... 10
Menu screen flow .............................................................. 11
CAMERA MODE SELECT screen .................................... 12
CAMERA VIDEO ADJUST screen .................................... 13
VIDEO ADJUST FOR POSITION screen ......................... 14
POSITION TEXT screen ................................................... 15
CAMERA TEXT screen ..................................................... 16
AREA TEXT screen .......................................................... 17
ALARM TEXT screen ........................................................ 18
AUTO PAN SET screen ..................................................... 19
AUTO PATROL SETUP screen ......................................... 20
FACTORY SETTINGS screen ........................................... 21

TROUBLESHOOTING ...................................................... 22

SPECIFICATIONS ............................................................. 23

Due to design modifications, data given in this instruction

book are subject to possible change without prior notice.

CAUTION

INFORMATION (FOR CANADA)
RENSEIGNEMENT (POUR CANADA)

Cet appareil numénque de la classe [B] respecte toutes les
exigences du Réglement sur le matériel brouilleur du Canada.

This Class [B] digital apparatus meets all requirements of
the canadian Interference-Causing Equipment Regulations.

FEATURES

m

Features large aperture lens with 16x zoom ratio (f=4.5 to
72mm, F1.2, at wide angle).

m

Wide coverage angle (Horizontal 3.8

°

 to 56

°

, Vertical 2.9

°

 to

44

°

).

m

64 preset positions.

m

360 degree endless panning.

m

Maximum 240 degree/sec. panning speed.

m

Maximum 2-second zoom speed.

m

One-push auto focus capability.

m

RS-485 (Maximum Number of Connections: 32) or RS-422A
control signal.

m

High-quality pictures by adopting dome cover with optical
distortion compensation and CCD with 380,000 (U: type)
or 440,000 (E: type) effective pixels.

m

Adopts large aperture lens, highly sensitive CCD.
(Minimum illumination : 2.8 lx, at wide angle)

m

Auto panning function.

m

Variable panning speed.
The panning speed is varied automatically according to
the zoom ratio of the lens. (The panning speed decreases
when the zoom lens is set near TELE and increases when
it is set near WIDE.)

m

Auto flip
When the camera reaches its tilting limit, it automatically

flips itself over by 180 degrees by panning around.
(This makes it possible for the camera to continue tilting
even after it has been tilted straight downward.)

m

Auto patrol

Preset positions are activated in sequence.

m

Menu screen display

    A built-in character generator provides an on-screen menu

display for easy selection and setting of various functions.

m

5-language on-screen display
Names or designations for camera, preset, area and alarm
can be displayed in English, German, French, Italian and
Spanish. (E type only)

m

Area title indication

    The 360˚ panning angle (horizontal rotation) is divided into

16 sectors, allowing you to check the title in each area.
When the camera is manually panned, the preset area
designation is shown on the screen.

CONTENTS

Thank you for purchasing this product.

m

Before starting an important recording, be sure to per-
form a test recording in order to confirm that a normal
recording is possible.

m

We do not accept liability for the loss of a recording in
the case of it becoming impossible to record due to a
problem in the video camera, VCR or video tape.

m

We do not accept liability for any damage to the cam-
era in cases when it is dropped because of incomplete
installation due to not observing the installation instruc-
tions correctly. Please be careful when installing the
camera.

Содержание TK-C700U - Color Cctv Camera

























Отзывы: