5
Maintenance and operating environment
䢇
This product is an indoor camera. It cannot be used outdoors.
䢇
This product is a pendant mount camera. Be sure to
install the product horizontally. The product will not work
properly if it is tilted.
䢇
Do not store in the following environments.
It might result in malfunctions or failure.
●
Hot or cold locations beyond the surrounding
temperature range of
–
10
I
to 50
I
.
●
Locations beyond the allowable operating humidity range
of 20 %RH to 90 %RH. (condensation is not allowed)
●
Near equipment that produces strong magnetic fields,
such as transformers or motors.
●
Near equipment that emits radio waves, such as
transceivers and mobile phones.
●
Locations with excessive dust and sand.
●
Locations that are subject to vibration such as inside
the car or ship.
●
Locations prone to moisture such as window side.
●
Locations subject to steam or oil, such as kitchens.
●
Special environment, such as those with combustible
atmosphere
●
Locations that emit radiation, X-rays, salt attack or
corrosive gases.
●
Locations where medicine is used such as pool.
䢇
Use of this product and cables connected to this product
at locations where strong electric waves and magnetic
waves are generated (e.g., near radio, TV, transformer,
monitor, etc.) may cause noise interferences in the
images or changes in the color.
䢇
Inadequate heat ventilation may result in malfunction of
this product.
Be sure not to block vents around the product.
This product discharges heat from the surface of the main
unit.
䢇
Do not install it at locations directly subjected to cold air such
as near the vents of air-conditioners or at locations with high
temperature. Condensation may occur inside the dome cover.
Maintenance
䢇
Turn off the power before performing maintenance.
䢇
Wipe using a soft cloth. Wiping it with thinner or benzene
may melt the surface or cause it to fog. For tough stains,
wipe using a cloth that is dipped into a neutral detergent
diluted with water, followed by wiping with a dry cloth.
●
Before starting an important recording, be sure to
perform a test recording in order to confirm that a
normal recording is possible.
●
We do not accept liability for the loss of a recording in
the case of it becoming impossible to record due to a
problem in the video camera, VTR, hard disk recorder or
video tape.
●
The Home Motion Detect (Tracking) function is a simple
function and cannot be used as a substitute for a
security alarm. JVC shall not be liable for any
inconveniences or damages caused in the event of error
detection or when these functions cannot be detected.
We shall not be liable for any inconveniences or
damages caused as a result of operational failure for
alarm input/output.
How to Read this Manual
䡵
Symbols used in this manual
Caution
:States precautions to be taken during operation.
Memo
:States restrictions on the functions or use of this
equipment. For reference purposes.
A
:Indicates the page numbers or items to refer to.
䡵
Contents of this manual
●
JVC holds the copyright to this manual. Any part or all of
this manual may not be reproduced without prior
consent from the company.
●
Product names of other companies described in this
manual are trademarks or registered trademarks of the
respective companies. Symbols such as
姠
,
姞
and
姝
are
omitted in this manual.
●
Design, specifications and other contents described in
this manual are subject to change for improvements
without prior notice.
Precautions
TK-C686E_EN.book Page 5 Tuesday, December 4, 2007 4:45 PM
