3
Getting Started
Realizing a High Picture Quality
This product uses high resolution 410,000 pixels CCD and a
new digital image processing IC to achieve a standard
resolution of 540 lines and high resolution/high image quality
of S/N50dB (standard).
ExDR (Wide Dynamic Range) function
It allows an object with luminance difference to be shot
vividly.
High Power Zoom Lens
The optical 36 times high power lens allows you to conduct
detailed monitoring.
The high power and large focal ratio F1.6 (WIDE edge) and
bright zoom lens realize 1.0 lux (AGC SUPER, 50 %) high
sensitivity during color mode.
Equipped with high precision high speed rotation
platform
The newly developed direct drive rotation platform rotates at
a high speed of 500
⬚
/s both horizontally and vertically, thus
allowing the camera to move to the preset positions quickly.
As it does not have a slowdown mechanism, it is very
durable, has a high stopping accuracy and can rotate
smoothly even at low speed.
Day/Night surveillance
This product is equipped with a day/night surveillance
infrared filter mechanism. During low illuminance such as
night time, switching out the infrared filter will switch the
product to high sensitivity mode (B&W).
Private Mask function
This function allows you to blankout areas that you do not
wish to display in the location to be recorded.
Tracking function (simple tracking)
This function tracks and shoots moving objects when home
position is displayed.
Image Stabilizer
This function detects camera shaking and reduces image
shaking.
Features
Safety precautions
Mounting to a firm place
As the unit rotates at high speed, mount it on a firm place
with sufficient strength to support the vibration and weight
of the unit (approx. 1.9 k
g
). If the ceiling material (e.g.,
decorated plywood, plaster board and bluster board) is not
strong enough, apply reinforcement materials such as
veneer plywood.
If the reinforcement is weak, the vibration will cause fuzzy
images on the monitor screen. In the worst scenario, the
camera may even fall off and hit somebody, resulting in
serious accidents.
Mounting the camera correctly with the
designated clamping brackets
Always use the designated clamping brackets. Be sure to
connect the fall prevention wire and tighten the fixing
screws or nuts securely.
Using the correct power and voltage
The rated power of this product is AC24 V 50 Hz/60 Hz.
Supplying a power beyond the rated value may result in
failures and in the worst scenario, smoking and fire.
This unit is able to divert lightening conduction to itself and
the connecting cables to a certain extent but this is not 100
% guaranteed. For installation locations that are likely to
suffer lightening strikes, be sure to take appropriate
measures such as adding arrestor to the connecting cables.
Consult your dealer as special technique is required when
installing this product.
Ensure that the fixing screws or nuts are tightened securely,
otherwise, the unit may fall off.
Inspect the unit regularly.
Screws may be loosened due to vibration or deterioration of
the mounting section. Perform regular inspections for
loosened screws and check whether there is any danger of
the unit falling off.
Handle the camera unit carefully when installing
this product. Otherwise it may fall and result in
injuries.
TK-C686E_EN.book Page 3 Tuesday, December 4, 2007 4:45 PM
