28
Changing camera settings from remote control
(
●
indicates the default value)
CAMERA FUNCTION1
screen
Item
Setting value
Functions and settings
V.PHASE
–156 to 0 to 156
(
●
0
)
This adjusts the vertical synchronization to those of other cameras when a selector
switch for the synchronizing system on the Ceilling Mount is at LL. (50 Hz power
region only.)
POS.TITLE LOC.
●
UP-L
DOWN-L
UP-C
DOWN-C
UP-R
DOWN-R
This item sets the display position of the position title and area title.
UP-L
:Display at the top left of the screen.
DOWN-C :Display at the bottom center of the screen.
DOWN-L :Display at the bottom left of the screen.
UP-R
:Display at the top right of the screen.
UP-C
:Display at the top center of the screen.
DOWN-R :Display at the bottom right of the screen.
PRIVATE MASK..
^
This function allows you to set and mask areas that you do not wish to display in the
recorded screen.
The selected areas move together with the pan, tilt and zoom operations.
[Private Mask Setting] (
MODE
●
OFF
ON
This item sets the ON/OFF setting of the Private Mask.
OFF
:Private Mask is disabled.
ON
:The [MASK MODE] screen is displayed. Select the Mask No., set to
A
ON
B
and set the mask. See [Private Mask Setting] (
Page 42) for details of the
settings.
LEVEL
0 to 10
(
●
4
)
This item sets the color of the mask.
A
0
B
is black. The larger the number is, the closer the color is to white.
When the number is
A
10
B
, the color is white.
MANUAL DISPLAY
OFF
●
ON
When the remote control unit is used for manual operation other than preset positions,
this item sets whether to display
A
MANUAL
B
on the screen.
If
A
ON
B
is selected,
A
AUTO PAN
B
and
A
AUTO TRACE..
B
will be displayed
respectively on the screens during auto pan and auto trace operation.
ON
:
Manual will be displayed.
OFF :
Manual will not be displayed.
Memo
：
●
When this item is set to
A
ON
B
, Manual will not be displayed during selection of
preset position if the [AREA DISPLAY] item (
Page 32) is set to
A
TITLE
B
or
A
DIR
B
.
HOME M.DETECT
●
OFF
ALARM
TRACKING
When the camera is at home position, this item sets the Motion Detect function,
which activates when there is a movement in the video.
The alarm signal will be output from the alarm output terminal.
Note
：
●
The Motion Detect function of this unit detects changes in brightness and
movement. As such, depending on changes in the illumination, it may or may not
detect movement of objects having the same color as the background color. It may
be difficult to detect objects with very slow movement. Check the operating
conditions thoroughly beforehand and configure the settings such that there will
not be any misoperation or omission of detection.
●
This function applies to home position screen when [STABILIZER] item is set to
A
OFF
B
. When [STABILIZER]. is set to
A
ON
B
, as the screen is enlarged, it will also
respond to image movement not shown on the screen. This is the specification of
this unit, not a malfunction.
OFF
^
Motion Detect is disabled.
HOME M.DETECT
(ALARM)
^
When there is a movement in the video, alarm signals will be output.
LEVEL
–5 to NORMAL to 5
(
●
NORMAL
)
This item sets the detection sensitivity.
To lower the sensitivity
B
Decrease the number
To increase the sensitivity
B
Increase the number
Memo
：
●
When the detection sensitivity is increased, the camera may also react to the
flickering of fluorescent lightings. Be sure to confirm on the Demonstration screen
after setting.
TK-C686E_EN.book Page 28 Tuesday, December 4, 2007 4:45 PM
