JVC TK-C686E, Руководство по установке

Страница: 16 / 68

16
Connection/Installation
5
Mount the fall prevention wire
Mount the fall prevention wire, which is attached to the
camera, to the fall prevention wire fixing bracket of the ceiling
clamping bracket.
6
Mount the camera
●
Align the
A
D
B
mark (green)/(red) inside the camera with
the
A
D
B
mark (green)/(red) on the ceiling clamping
bracket.
●
Insert the camera into the ceiling clamping bracket until
you hear a click sound and mount it securely.
7
Check that the camera fixing lock knobs (x2) are
sticking out.
If the camera is mounted on securely, the camera fixing lock
knobs (x2) will stick out a little.
Note ：
●
Before mounting the camera, check that the camera fixing
lock knobs are not locked (i.e., lock knobs are on top). The
camera cannot be mounted if the lock knobs are locked.
●
When pulling out the cables from the side, remove the
cable cover of the camera. (
A
Page 14)
8
Lock
When the camera is mounted on the ceiling clamping
bracket, lower the camera fixing lock knobs (x2) in the
direction of the arrow and secure the camera such that it
does not fall off.
Memo ：
●
To remove the camera, follow the reverse procedures.
Mounting the Camera
(continued)
●
Be sure to connect the fall prevention wire. Otherwise,
the camera may fall.
●
To prevent danger, do not leave the fall prevention wire
dangling by the camera.
Caution
6
5
7
Fall prevention wire
fixing bracket
Fall Prevention Wire
D
mark
(green)
D
mark (red)
During
mounting
After
mounting
●
Be sure to check that the camera fixing lock knobs (x2)
are locked securely. Otherwise, the camera may fall.
●
After mounting, check that the camera is mounted
securely. Improper mounting may cause the camera to
fall off.
Camera fixing
lock knob (x2)
Caution
TK-C686E_EN.book Page 16 Tuesday, December 4, 2007 4:45 PM