E-16
Installation and connection
1.
Follow steps 1 - 5 of Mounting the Base
to the Ceiling.
(
page 10 & 11)
2.
Loosen the set screws (M3
×
6mm) with
a flat-head screwdriver and remove the
plug on the main unit side.
3.
Insert the removed plug into the conduit
hole on the bottom of the camera.
4.
Screw in the pipe into the conduit hole
on the main unit side.
5.
Steps hereafter are the same as when
installing the dome camera to the
ceiling.
(
page 12 - 15)
When installation cannot be made to the ceiling, use the conduit hole on the main unit side to
install to the pipe.
CAUTION
When installing the pipe to the conduit
hole (side), do not screw in the thread
portion of the pipe more than 12mm
(
15
/
32
"). Screwing in the pipe into the base
more than required may damage the base
interior.
2.
4.
3.
Set screw
Conduit
plug
When Installing the Camera Using the Conduit Hole (side)
03_e_TK-C205VPU_02_20_e.p65
05.4.22, 9:38 AM
16
