JVC TK-C205, Инструкция по эксплуатации

Страница: 10 / 54

E-8
1 Power Supply cable
To input DC 12 V or AC 24 V power.
The AC 24 V power supply should
conform to the following:
U-type: Class 2 only
E-type: Isolated power supply only
2 Video signal output connector (BNC)
This BNC connector outputs a composite
video signal. Connect this to the video
input connector of a video monitor,
switcher, etc.
3 Safety cable
This wire is mounted to the ceiling slab
or channel. (Safety cable not included.)
4 Mounting holes
These holes are used to mount the
camera body to the ceiling. When using
a 4 inch square electrical box, the 2 holes
diagonally across are used to fix the box
in place.
(
page 13)
5 Cable extraction hole
This hole is used to extract cables from
the side of the camera without opening
holes in the ceiling.
6 Cover
This cover is removed to pull the cables
through the
5
cable extraction hole.
Replace the cover after pulling the
cables.
7 Cover locking screw
This screw is removed when removing
the
6
cover.
Introduction
Names and Operations of Parts (continued)
3
2 1
4
5
6 7 7
4
Main unit side
Body Underside
CAUTION:
To avoid unforeseen accidents, attach the
safety cable. Otherwise, there is nothing
to prevent the camera from falling should
it come loose.
03e_tkc205_e.p65 05.4.1, 9:27 AM 8