JVC Remote Control Software
Remote control software (RS422A type) is available by JVC as a purpose of demonstration at free.(The
performance is not guaranteed by JVC due to demonstration purpose. Also not able to open source code.)
The following is GUI image
Features
1. Camera control possible by RS422A interface
2. Video image output available on the GUI using video card or it is able to connect from camera to video
monitor with BNC.
Connections
1. Remote control ------ Please prepare locally converter from RS422A to RS232C.
After execute JVC software,please have right click and select options settings. Kindly check COM port
setting.
The below is just example.
CAM
Converter
PC
RS422A
RS232C
RS232C
TX+ ----------RX+
TX- -----------RX-
TX ------------RX
RX+ ----------TX+
RX -----------TX
RX- ----------TX-
GND ---------GND
Refer to Converter, please kindly check with instruction manual of conveter because depending on the
converter, the connection between PC and converter is different.
2. Video card ------ Please arrange locally video card(PCI bus or PCMCIA type) and install the driver into PC.
After execute JVC software, please have right click and select options settings. Then kindly select driver in
capture device.
Camera Controls
By GUI of this software, it's able to set up ExDr/shutter, Iris/BLC, AGC/SENS UP (slow shutter), Auto EXP, white
balance, video adjustment,reverse image, camera ID. However, it is not possible full set up. So to have full set
up, please use camera menu in GUI and select&set parameters by cursol.
23
REMOTE CONTROL SOFTWARE
Menu
Option Dialog
TK-C1480Manual.xprNew 01.10.29 5:27 PM ページ 23