JVC TH-S33, Руководство по обслуживанию

Страница: 20 / 61

1-20 (No.MB445)
3.2.5 Removing the feed motor
(See Figs.4,8 and 9)
• Remove the traverse mechanism assembly.
(1) From the top side of the traverse mechanism assembly, re-
move the screw
C
and remove the feed bracket from the
sections
d
. (See Fig.4.)
(2) Release the claw
e
of the thrust spring in the direction of
the arrow and remove the thrust spring. (See Fig.4.)
(3) Remove the wires from the soldered section
j
on the spin-
dle motor board. (See Fig.8.)
Reference:
• When attaching the feed motor, pass the wire through
the section
k
on the traverse mechanism assembly.
(See Fig.8.)
• Pass the wire through the lower section of the rod
spring. (See Fig.8.)
(4) Remove the screw shaft in the direction of the arrow. (See
Fig.8.)
(5) From the side of the traverse me chanism assembly, re-
move the screw
E
attaching the feed motor. (See Fig.8.)
(6) Take out the feed motor from the traverse mechanism as-
sembly.
3.2.6 Removing the spindle motor board
(See Figs.8 and 9)
• Remove the traverse mechanism assembly and DVD module
board.
(1) From the top side of the traverse mechanism assembly, re-
move the wires from the soldered section
j
on the spindle
motor board. (See Fig.8.)
(2) From the bottom side of th e traverse mechanism assem-
bly, remove the three screws
F
attaching the spindle motor
board. (See Fig.9.)
Reference:
• When attaching the sp indle motor boa rd, pass the wi re
through the section
m
on the traverse mechanism assembly.
(See Fig.9.)
• After attaching the screws
F
, apply bond as before.
Fig.8
Fig.9
Spindle motor board
Screw shaft
Wires
k
j
Traverse mechanism assembly
Rod spring
E
Traverse mechanism assembly
F
m
F
Spindle motor
board