ADVANCED MENU (Continued)
B&W Av:Pk
Sets the exposure detection method for the black-and-white mode to
the ratio of the AVERAGE value and PEAK value. When the screen,
other than the highlighted section, becomes dark, increase the
AVERAGE value (ex. 10:0). When the highlighted section becomes
dark, increase the PEAK value (ex. 5:5).
[Setting values : 10:0, 9:1, 8:2, 7:3, 6:4, 5:5] (Default value: 8:2)
Memo
When the D/N MODE is set to “AUTO”, setting the B&W Av:Pk
to the low value (ex. 5:5) may cause hunting. Setting should be
done upon checking the actual images.
ALC PRIORITY
Sets whether to prioritize motion or picture quality when the subject
becomes dark.
[Setting values : MOTION, COMBO, PICTURE] (Default value: MOTION)
MOTION : Prioritizes motion. AGC (Automatic Gain Control) operates
with priority.
COMBO
: Adjusts motion and picture quality equally.
PICTURE : Prioritizes picture quality. SENSE UP (Electronic Sense
Up) operates with priority.
Memo
When [AGC] or [SENSE UP] is set to “OFF”, “ALC PRIORITY”
does not work even if it is set.
SHUTTER SPEED
Sets the speed of the electronic shutter. The higher the shutter speed,
the smear phenomenon due to the characteristic of the CCD where
white, vertical stripes appear around a bright light source will be
emphasized.
[Setting values : 1/60 (U model), 1/50 (E model), 1/100 (U model), 1/120 (E
model), 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000]
(Default value: 1/60 (U model), 1/50 (E model))
Memo
v
[SHUTTER SPEED] cannot be set in the following cases:
- when the [WIDE-D LEVEL] is set to “ON”
- when [SENSE UP] is set to “OFF”
Menu Setting
E-48
