Mounting the Camera (Continued)
m
Mounting the Camera Unit
1
Make a hole (
Φ
30 mm) in the ceiling using the template
provided
2
Mount the fall prevention wire for connecting the camera unit to
the ceiling
The fall prevention wire is not provided. Prepare a wire, taking into due
consideration the length, strength, pull and material (insulating).
①
Remove the Fall Prevention Wire Mounting Screw on the bottom
of the camera unit to mount the fall prevention wire.
②
Mount the fall prevention wire at a structurally strong location.
3
Mount the camera unit to the ceiling
Pull the cables from the ceiling and camera towards the lens as
illustrated in the diagram, align the (
ñ
) mark to the shooting direction
and mount the camera to the ceiling. Align the (
ñ
) mark upwards when
mounting the camera on the wall.
.
2
1
3
2 mm
8 mm
Φ30 mm
Fall prevention wire
(not supplied)
Shooting
direction mark
Camera unit
Φ4.1 - Φ6.5 mm
Φ12 mm and below
6 mm and below
Fall prevention
wire
Φ4 mm x2 (not supplied)
Note
The screws for mounting the camera are not provided. Use a
suitable type of screws according to the material of the
mounting location.
Installation
E-24
