manualshive.com logo in svg

JVC Super LoLux HD VN-H257VPU, Инструкция по эксплуатации, Страница: 63 / 128

Поделиться
Скачать
JVC Super LoLux HD VN-H257VPU Скачать руководство пользователя страница 63

63

* The [Set values] in bold letters are factory defaults.

C

Standard Surveillance 
Protocol

Sets standard surveillance protocols.

PSIA/ONVIF

You can change the standard surveillance protocols.

[Set values: 

PSIA, ONVIF, 

OFF]

D

JPEG Streaming

Selects the JPEG image streaming priority.

Priority

Selects whether to give priority to the client number for JPEG 
image streaming or the frame rate.
Client Number : Gives priority to the streaming client number.

Lowers the JPEG frame rate as delivery 
requests increase, allowing delivery to a 
maximum of 20 clients.

Framerate

: Gives priority to the frame rate.

Set this to maintain the frame rate for JPEG 
images requested by clients. Delivery requests 
that exceed the maximum number will be 
denied.

[Set values: Client Number, 

Framerate

]

Содержание Super LoLux HD VN-H257VPU

































































































































Отзывы:

Нет отзывов