JVC Super LoLux HD VN-H257VPU, Инструкция по эксплуатации, Страница: 112 / 128

112
Operations
On Screen Display Settings
Sets a display item on the viewer screen.
An image is overlaid by characters on the Built-in Viewer.
This page can be used during access using
A admin B or A operator B .
●
When the Control Menu is open, click [Viewer Setup] to switch to the Viewer Setup Menu.
●
Click [On Screen Display] to open the Settings screen.
●
When you click the [Apply] button, the current settings are made valid on the viewer and they are
stored in the computer.
* The [Set values] in bold letters are factory defaults.
Built-in Viewer Operations
(continued)
B
C
A
E
D
䡵
On Screen Display
A
Camera ID When turned ON, the [Camera ID] is displayed at the top of the screen.
You can set the [Camera ID] from the camera's [Basic Setting2] or [Camera]
Page. (
A
Page 15, 18)
[Set values: ON, OFF]
B
Position Title When turned ON, the position title is displayed in the lower right of the screen.
[Set values: ON, OFF]
C
Disp MD /
Tampering When you turn the Motion or Tampering Detection A ON B , the image display
frame is shown in red.
[Set values: ON, OFF]
D
Time Turn the [Time]
A
ON
B
to display the time.
The time is displayed at the right bottom position of the screen.
The clock time contained in the JPEG data or stream data is displayed.
* Stream data: Stream data encoded with H.264 Baseline, H.264 High, or MPEG-4.
[Set values: ON, OFF]
E
Format Selects a time display format. YYYY, MM and DD denote the year, month and
days. HH, MM and SS are hours, minutes and seconds. "mm" is 1/100 seconds.
[Set values: YYYY/MM/DD HH:MM:SS.mm , YYYY/MM/DD HH:MM:SS,
DD/MM/YYYY HH:MM:SS, MM/DD/YYYY HH:MM:SS, MM/DD
HH:MM:SS, HH:MM:SS, HH:MM
]