![JVC SR MV45U Скачать руководство пользователя страница 54](http://html.mh-extra.com/html/jvc/sr-mv45u/sr-mv45u_instructions-manual_177825054.webp)
Filename [SR-MV45_55U_10Editing.fm]
Masterpage:Left+
54
EN
Page 54
January 10, 2007 1:18 pm
EDITING
You can dub selected audio from a DVD or Audio CD disc to a
digital audio device.
However, it is not possible to dub copy-protected discs.
Example: Dubbing to an MD
1
Connect the unit and a digital audio device using either an
optional optical cable or an optional coaxial cable.
2
Place a disc on the unit and load an MD on the connected digital
audio device.
3
Select the audio to be dubbed.
4
Start playback slightly before the actual point from where you
wish to start dubbing.
5
Press
9
to pause playback.
6
Select the input mode on the connected digital audio device.
7
Press
4
to start playback on the unit.
8
Start recording on the digital audio device.
9
Stop recording on the digital audio device. Then press
8
to stop
playback on the unit.
NOTE:
There may be a discrepancy of several seconds between where you
intend editing to start, and where it actually starts.
Digital Audio Dubbing
●
Turn on the TV and select the AV mode.
●
Slide the
TV/CABLE/DBS/DVD
switch to
DVD
.
Rear of unit
Note for connection:
Remove the protection cap from the cable.
Digital audio device
(MD deck, etc.)
Coaxial cable
(not supplied)
To [DIGITAL AUDIO OUT
(COAXIAL)]
Player
Recorder
Optical cable
(not supplied)
To [DIGITAL AUDIO
OUT (OPTICAL)]
SR-MV45_55US.book Page 54 Wednesday, January 10, 2007 1:18 PM