m
HDMI-CEC
For setting the HDMI-CEC operation from the connected
device.
Setting Values
Description
OFF
Disables HDMI-CEC.
ON
Enables HDMI-CEC.
m
COMPONENT OUTPUT
For setting the resolution of video output from the
[COMPONENT VIDEO OUT] terminals.
Setting Values
Description
480i
Sets output to “480i”.
480p
Sets output to “480p”.
720p
Sets output to “720p”.
1080i
Sets output to “1080i”.
Memo:
v
When the resolution is set to “720p”, videos are output at
“1080i” other than those recorded at “720p” even though
“720p” is shown on the display.
v
This unit does not support component output at “1080p”. To
output at “1080p”, do so via HDMI connection.
v
If “HDMI VIDEO MODE” is set to “ON”, the unit will output
at “480i” regardless of the current setting.
v
If “HDMI VIDEO MODE” is set to “OFF”, or when a HDMI
connection is used, DVD videos will be output at “480p”
even if “720p” or “1080i” has been set.
v
The aspect ratio of video/S-video output changes according
to the component output setting. As such, there may be
cases where the aspect ratio of the video/S-video output is
different from the predefined setting of the content.
m
VIDEO INPUT SETTING
Choose a setting according to the video terminal to be
connected when an external analog input terminal is used.
Setting
Values
Description
VIDEO
Use this setting when connecting via the
video (BNC) terminal.
S-VIDEO
Use this setting when connecting via the
S-video (black) terminal.
SDI CONNECTION
.
1-
4'6740
5'672
5'.'%6
':+6
%'06'4
6+/'%1&'&+52.#;215+6+10
'6+/'
10
10
4'%.1%-
%108'45+10
5&+#7&+11762765'66+0)
6+/'%1&'+02765'66+0)
5&+#7&+1+02765'66+0)
5&+%100'%6+10
%*%*
%*%*
For specifying settings related to the SDI output terminal.
m
SDI AUDIO INPUT SETTING
Set the channel (Lch, Rch) to which the video/audio of the
SD-SDI/HD-SDI input is to be recorded.
Setting
Values
Description
CH1-CH2
Use this setting to record the digital audio
input by assigning Lch to CH-1 of GROUP1
and Rch to CH-2.
CH3-CH4
Use this setting to record the digital audio
input by assigning Lch to CH-3 of GROUP1
and Rch to CH-4.
CH5-CH6
Use this setting to record the digital audio
input by assigning Lch to CH-5 of GROUP2
and Rch to CH-6.
CH7-CH8
Use this setting to record the digital audio
input by assigning Lch to CH-7 of GROUP2
and Rch to CH-8.
ANALOG
Use this setting to record analog audio
signals from the SDI device to the L/Rch.
Memo:
v
SD-SDI/HD-SDI digital audio (embedded audio) can be
recorded to maximum of four groups, two channel pairs per
each group. (four channels per group)
v
This unit uses Group 1 and Group 2, and records SD-SDI/
HD-SDI digital audio in the combinations of channels
described below:
GROUP NUMBER
Lch
Rch
GROUP1
CH1
CH2
GROUP1
CH3
CH4
GROUP2
CH5
CH6
GROUP2
CH7
CH8
Settings Menu
85
2012/3/8
13:53:0
