SUBSIDIARY SETTINGS
Page 75Monday, 28 March 2005 21:23
Filename [TH-R1R3EU_10Subsidiary.fm]
Masterpage:Left+
75
8
OFF /
When this function is set to
, the recording information is
automatically stored in the library. For details, refer to
8
You can select the audio format when you record a title in XP
mode. When this function is set to
, you can obtain
a high-quality audio sound.
To record in Dolby Digital format.
:
To record in Linear PCM format.
8
You can select the desired NICAM audio channel to be recorded
on a DVD-R/RW (Video mode) disc.
:
To record the main language of NICAM audio.
To record the sub language of NICAM audio.
To record the standard (monaural) sound of NICAM audio.
This function works only for the NICAM bilingual programme.
8
When this function is set to
, you can easily start recording the
programme that you are watching on your TV. While holding
press
on the remote control, or press
on the unit.
●
When you use the Direct Rec function, be sure to use a TV
offering T-V LINK, etc. and connect a fully-wired 21-pin SCART
cable between the unit and the TV. (
●
, the
button functions as
described in
●
During Direct Rec,
appears on the front display panel.
●
If a programme is recorded with the Direct Rec, the station name
will not be registered in the library.
station name.
8
You can play back PAL discs, or record PAL and SECAM signals on
this unit. Select the appropriate colour system.
.
identifies the input signal and
automatically switches to an appropriate colour system. When
is not selected, you have to switch the colour system to
an appropriate setting (PAL or SECAM) manually.
To record PAL signals.
To record SECAM signals.
8
OFF /
When this function is set to
, various operational indicators
appear on the TV screen.
To turn off superimposed indications.
To superimpose operational indications for approximately five
seconds just after the corresponding operation.
●
Even when
, you can display
the various operational indicators by pressing
the remote control. To clear the operational indicators, press
●
When you use this unit as the source player for editing, be sure to
set
before starting. (
●
When you select
, during playback, the operation mode
indicators may be disturbed depending on the type of disc being
used.
8
Select this when you want to receive an unstable channel with
poor signals.
When this function is set to
, the TV screen becomes all
grey when receiving a channel not in use.
8
You can change the brightness of the front display panel.
Normally select this. To turn on the display and blue lamp of the
front display panel.
To change the brightness level.
To turn off the display and blue lamp of the front display panel.
8
When this function is set to
, you can reduce the power
consumption while the unit is turned off.
●
During Power Save mode
^
the front display panel will be turned off.
●
It takes some time for the unit to complete initialisation after you
turn on the unit power, with
panel.
8
This unit offers you the choice to view on-screen messages in
10 different languages. Although
the language automatically, you can change the language setting
manually as required. (
●
For details, refer to
TH-R1R3EU_00.book Page 75 Monday, March 28, 2005 9:23 PM
