31
English
Adjusting Surround Mode
Using Remote Control
When playing back the source with Surround mode, you can
adjust the speaker output levels for Surround modes.
Once you have adjusted the Surround modes, adjustment is
memorized for each source.
• You can also adjust Surround modes using the Choice
menu (see pages 54 and 55) or buttons on the front panel
(see page 27).
1
Select and play back software you like.
2
Activate and select Surround mode.
• When 2-channel source is played back, you can select
Surround modes.
3
Adjust the speaker output levels.
• To adjust center speaker, press /–.
*
• To adjust left surround speaker, press SURR L +/–.
• To adjust right surround speaker, press SURR R +/–.
• To adjust subwoofer, press /–.
• To adjust the effect level, press EFFECT.
**
The name for the item currently adjusted appears on the
display.
Notes:
• You can adjust the speaker output levels for the activated speakers
ONLY (the speaker indicators are lit on the display).
*
You cannot adjust the output level of the center speaker when one
of the DAP modes is activated.
**
You can adjust the effect level only when one of the DAP modes is
activated.
Relation between Surround modes and adjustable items
Mode
Item
TEST
CENTER
SURR L
SURR R
SUBWOOFER
EFFECT
Dolby Digital
䡬
䡬
䡬
䡬
䡬
⳯
DTS Digital Surround
䡬
䡬
䡬
䡬
䡬
⳯
Dolby Pro Logic II
䡬
䡬
䡬
䡬
䡬
⳯
DAP
䡬
⳯
䡬
䡬
䡬
䡬
All Channel Stereo
䡬
䡬
䡬
䡬
䡬
⳯
Note:
• You cannot adjust the speakers which are not used by the selected Surround mode.
䡬
: Possible
⳯
: Impossible
For using test tone
1
Press TEST.
The playback sound stops during play.
“TEST L” starts flashing on the display and a test tone
comes out of the speakers in the following order:
2
Adjust the speaker output level as follows:
• To adjust center speaker, press /–.
• To adjust left surround speaker, press SURR L +/–.
• To adjust right surround speaker, press SURR R +/–.
Notes:
• You cannot adjust the speaker output levels if you have set the
speaker information to “NO.”
• No test tone comes out of a speaker when its speaker
information is set to “NO.”
• When you press EFFECT or /–, the test tone stops.
3
Press TEST to stop the test tone.
The test tone stops.
• When no operation is done for about 1 minute, the test
tone stops automatically.
Creating Realistic Sound Fields
TA NEWS INFO
S
AL AUTO
DSP SLEEP
REPEAT
RANDOM
RDS
INPUT ATT
SPK 1 2
AUTO MODE
A.POSITION
PROGRESSIVE
1A-B
LFE
SURROUND
GROUP TITLE TRACK
CHAP. RESUME
kHz
MHz
VOL
BONUS
B.S.P
TUNED STEREO
AUTO MUTING
PL
UBWFR
L
C
R
S
RS
PROGRAM
REC
(
Left front speaker
)
(
Left surround speaker
)
(
Right surround speaker
)
(
Center speaker
)
(
Right front speaker
)
TEST L
TEST C
TEST LS
TSET RS
TEST R
28-31_RX-DV31SL[C]f.p65
03.12.18, 15:08
31