13
English
To use both pairs of the speakers
Press SPEAKERS 1 and 2 so that the SPK 1 and 2 indicators
light up on the display.
To use neither pairs of the speakers
Press SPEAKERS 1 and 2 so that the SPK 1 and SPK 2
indicators go off from the display.
• This activates the HEADPHONE mode (“HEADPHONE”
appears on the display).
Notes:
• If you select any of the Surround modes while using both pairs of
the front speakers connected to the FRONT SPEAKERS 1 and 2
terminals, the speakers connected to the FRONT SPEAKERS 2
terminals are deactivated.
• While the Surround mode is in use, you can only select either the
speakers connected to the FRONT SPEAKERS 1 or 2 terminals.
Changing the Source Name
When you connect a CD recorder to the TAPE/CDR jacks on
the rear panel, change the source name which will be shown
on the display.
On the front panel ONLY
Ex.:
When changing the source name from “TAPE” to
“CDR”
1
Press TAPE/CDR (SOURCE NAME) to select
as the source.
2
Press and hold SOURCE NAME (TAPE/CDR)
until “ASSGN. CDR” appears on the display.
To change the source name to “TAPE”
Press and hold SOURCE NAME (TAPE/CDR) until
“ASSGN. TAPE” appears on the display in step
2
.
Note:
• Without changing the source name, you can still use the connected
components. However, there may be some inconveniences:
– The unexpected source name will appear on the display when you
press TAPE/CDR (SOURCE NAME) on the front panel.
– The CDR or TAPE button on the remote control will not work for
selecting the source.
– You cannot use the digital input (see page 25) for the CD
recorder.
Selecting the Front Speakers
When you have connected two pairs of front speakers, you
can select which to use.
On the front panel ONLY
To use the speakers connected to the FRONT SPEAKERS
1 terminals
Press SPEAKERS 1 so that the SPK 1 indicator lights up on
the display. (Make sure that SPK 2 is not lit on the display.)
To use the speakers connected to the FRONT SPEAKERS
2 terminals
Press SPEAKERS 2 so that the SPK 2 indicator lights up on
the display. (Make sure that SPK 1 is not lit on the display.)
7
Listening with headphones
Connect a pair of headphones to the (phones) jack on
the front panel
.
This cancels the Surround mode currently selected,
deactivates speakers, and activates the HEADPHONE mode.
The SPK 1 and 2 indicators go off from the display.
• Disconnecting a pair of headphones from the (phones)
jack cancels the HEADPHONE mode and activates
speakers.
HEADPHONE mode
When using the headphones, the following signals are
output regardless of your speaker setting:
–
For 2-channel sources,
the front left and right channel
signals are output directly from the left and right
headphones.
–
For multi-channel sources,
the front left and right,
center, and surround channel signals are down-mixed
and then output from the headphones without missing
bass element.
–
For DVD AUDIO ONLY:
When down-mixing is prohibited
on the disc, only signals of the front left and right channel
are output.
CAUTION:
Be sure to turn down the volume:
• Before connecting or putting on headphones, as high
volume can damage both the headphones and your
hearing.
• Before removing headphones, as high volume may come
out of the speakers.
Basic Operations
MPEG-2 AAC
TA NEWS INFO
ANALOG
S
DIGITAL AUTO
DSP SLEEP
REPEAT
RANDOM
RDS
INPUT ATT
SPK 1 2
AUTO MODE
A.POSITION
PROGRESSIVE
1A-B
DIGITAL
LPCM
LFE
PPCM
AUTO SURROUND
GROUP TITLE TRACK
CHAP. RESUME
kHz
MHz
VOL
BONUS
B.S.P
TUNED STEREO
AUTO MUTING
PL
SUBWFR
L
C
R
LS
RS
PROGRAM
REC
ASSGN. CDR
ASSGN. TAPE
12-16_RX-DV31SL[C]f.p65
03.12.18, 15:23
13
