1-14 (No.22019)
3.1.21 Removing the power amp. assembly
(See Fig.20 and 21)
• Prior to performing the following procedures, remove the top
cover, rear panel, front panel assembly, system control board,
DSP board, audio signal 1 board, audio signal 2 board, video
board, S video board, V compo 1 board and speaker board.
(1) Remove the three screws
Q
fixing the barriers, and remove
the tow barriers.
(2) Remove the eight screws
R
attaching the power amp.
assembly.
(3) Pull up the power amp. assembly.
Fig.21
R
(Rear side)