JVC RX-D411S - AV Receiver, Инструкция по эксплуатации

Страница: 108 / 117

English
7
Connecting procedure
1
If you have already plugged your VCR,
DVD player, TV, and this receiver into the
AC outlets, unplug their AC power cords
first.
2
Connect your VCR, DVD player, TV, and
this receiver, using the cables with the
monaural mini-plugs (not supplied).
• See “Connections 1” on the previous page.
3
Connect the audio input/output jacks
on the VCR, DVD player, TV, and this
receiver using the audio cables.
• See pages 10 to 13.
4
Connect the video input/output jacks
on the VCR, DVD player, TV, and this
receiver using the S-video cables,
composite video cables, or component
video cables.
• See “Connections 2” on the previous page.
5
Plug the AC power cords of the
connected components and this receiver
into the AC outlets.
6
When turning on the TV for the first time
after the AV COMPU LINK connection,
turn the TV volume to the minimum
using the TV volume control on the TV.
7
Turn on the connected components first,
then turn on this receiver.
• When turning on the VCR, use the remote control
supplied with this receiver (press VCR ).
The AV COMPU LINK remote control system allows you to use
the five basic functions listed below.
Remote control of the TV, DVD player, and VCR using
this remote control
See pages 47 to 51 for details.
• Aim the remote control directly at the remote sensor on
each component.
One-touch video play
Simply by inserting a video cassette without its safety tab into
the VCR, you can enjoy the video playback without setting
other switches manually. The receiver automatically turns on
and changes the source to “VCR.”
The TV automatically turns on and changes the input mode
to the appropriate position so that you can view the playback
picture.
When you insert a video cassette with its safety tab, press the
play (
3
) button on the VCR or on the remote control. So, you
can get the same result.
One-touch DVD play
Simply by starting playback on the DVD player, you can enjoy
the DVD playback without setting other switches manually.
The following is set automatically:
• Turning on the receiver.
• Changing the source to “DVR/DVD.”
The TV automatically turns on and changes the input mode
to the appropriate position so that you can view the playback
picture.
Automatic selection of TV input mode
• When you select “TV” as the source to play on the receiver,
the TV automatically changes the input mode to the TV
tuner so that you can watch TV.
• When you select “DVR/DVD,” “VCR,” or “DBS” as the source
to play on the receiver, the TV automatically changes the
input mode to the appropriate position (either video input 1
or video input 2) so that you can view the playback picture.
NOTE
This function does not work when you connect this receiver and the
TV with the AV COMPU LINK EX terminal using a component video
cable. In this case, reconnect the TV referring to Case 1 or Case 2 on
page 45.
Automatic power on/off
The TV, DVD player, and VCR turn on and off along with the
receiver.
When you turn on the receiver;
• If the previously selected source is “TV” or “DBS,” only the TV
will turn on automatically.
• If the previously selected source is “DVR/DVD,” the TV and
DVD player will turn on automatically.
• If the previously selected source is “VCR,” the TV and VCR
will turn on automatically.
When you turn off the receiver, the TV, DVD player, and VCR
will turn off.
NOTES
• When “VIDEO OUTPUT” is set to “HDMI” (see page 34), the AV
COMPU LINK remote control system is restricted to turning the
video component on and off.
• If you turn off the receiver while recording on the VCR, the VCR will
not turn off, but continue recording.
46
45-54_Others.indd 46 45-54_Others.indd 46 06.6.5 5:30:15 PM 06.6.5 5:30:15 PM