1-6 (No.MB534)
SECTION 3
DISASSEMBLY
3.1
Main body section
3.1.1 Removing the top cover
(1) From the both sides of the main body, remove the four
screws
A
attaching the top cover. (See Fig.1)
(2) From the back side of the main body, remove the six
screws
B
attaching the top cover. (See Fig.2)
(3) Remove the top cover in the direction of the arrow. (See
Fig.1)
Fig.1
Fig.2
3.1.2 Removing the tuner
(See Fig.3)
• Remove the top cover.
(1) From the top side of the main body, disconnect the card
wire from the connector
CN1
on the tuner.
(2) From the back side of the main body, remove the two
screws
C
attaching the tuner to the rear panel and then
take out the tuner.
Fig.3
A
Top cover
B
Top cover
B
B
C
Tuner
CN1
Rear panel
Содержание RX-D205SJ
Страница 17: ... M E M O ...