Setting the Network Standby
You can set the standby mode of the System.
0
When the System is plugged in for the first time, the
System is in normal standby mode.
1
Set the standby mode.
0
While the System is turned off...
.
Main unit
Remote control
.
Network Standby
Normal Standby
During the network standby mode, if RV-S5 is
selected by the AirPlay/DLNA device and
playback is started, this System turns on the
power automatically and the music is output from
the System.
NOTE
0
Establish the network connection previously
between the System and your AirPlay/DLNA
0
Press the [SET] button on the remote control
when “Press SET key” is displayed.
0
To cancel the network standby mode, press the
[NETWORK SETUP] button (remote control)
during the normal standby mode. The System
will switch to the low power consumption mode.
AirPlay / DLNA Auto Switch
For sources other than “NETWORK”, if RV-S5 is
selected by an AirPlay/DLNA device and playback is
started, the source is switched to NETWORK
automatically and music from the AirPlay/DLNA
device is played back.
NOTE
0
Establish the network connection previously
between the System and your AirPlay/DLNA device.
0
Press the [SET] button on the remote control when
“Press SET key” is displayed.
23
