JVC LST0728-001C, Инструкция по эксплуатации

Страница: 80 / 168

72
Applications
Unit Setting 2
Main Menu List (continued)
C
D
A
B
Item Preset Values Description
Reference
Page
A
HDD meter
Display at startup Select check box
●
Do not select check box
Select this check box to display the HDD meter when the
system starts up.
●
For details on HDD meter, refer to [HDD Meter] (
A
Page 133).
A Page 133
B
Clock setting
Display at startup Select check box
●
Do not select check box
Select this check box to display the clock when the system
starts up. A Page 152
Display at date Select check box
●
Do not select check box
Select this check box to display the date on the clock. A Page 152
Display at second Select check box
●
Do not select check box
Select this check box to display the seconds on the clock.
A
Page 152
C
SNMP setting
Enable of SNMP Select check box
●
Do not select check box
Select this check box to enable the SNMP function.
A
Page 134
Enable of TRAP Select check box
●
Do not select check box
Select this check box to enable the TRAP function. A Page 134
SNMP manager’s
address ^ Specify the IP address of the SNMP manager. (IP address) A Page 134
Community name ^ Specify the SNMP community name. (1 to 32 characters.
Alphanumeric characters only.) A Page 134
Confirmation interval
of alarm 10 seconds Specify the interval to monitor the alarm.
(10 to 9999 seconds) A Page 152
Confirmation interval
of CPU usage 10 seconds Specify the interval to monitor CPU usage.
(10 to 9999 seconds) A Page 152
Confirmation interval
of D-drive 60 seconds Specify the interval to monitor the writing rate to the D drive.
(30 to 9999 seconds)
A
Page 152
Confirmation interval
of NVR Viewer 10 seconds Specify the interval to monitor the startup status of NVR viewer.
(10 to 9999 seconds) A Page 152
Confirmation interval
of camera 60 seconds Specify the interval to monitor connection status of the camera.
(60 to 9999 seconds) A Page 152
Copy extension MIB onto the flash memory Copy the MIB extension information into a flash memory device.
●
For details on SNMP settings, refer to [Setting SNMP]
(
A Page 134).
A Page 134
D
OK/Cancel
^
OK: Exits after entries and the selected content are configured
to the system.
Cancel: Exits without saving all entries and selected settings.
^