JVC LST0728-001C, Инструкция по эксплуатации

Страница: 158 / 168

150
Others
Default Value List
Scheduler [Scheduler Setting] ( A Page 53) [ ] : Factory Settings
Online [Always Online]
Enable speedup [Always Offline]
E-mail [Always Offline]
Patrolling [Always Offline]
Camera Settings [Edit Device...] - [Settings] ( A Page 56)
PTZ Camera Section
Some of the connected cameras are Pna/Tilt/Zoom cameras [Not Selected]
Camera Type [Fixed]
Camera Settings [Specifying Image Recording Settings] ( A Page 55)
Speedup Settings
Frame Rate [8]
Frame/ [Sec.] /Min. /Hour
Recording Settings
Desired framerate [8]
Frame/ [Sec.] /Min. /Hour
Enable speedup [Not Selected]
When to store images in database Always /Never /[Conditionally]
On motion [Selected]
On event [Not Selected]
( )seconds pre/post recordings on motion/event [3]
Database Settings [Database Settings] ( A Page 110)
Max.records in database [Selected] [108000]
Max timespan in database [Not Selected]
Archive automatically when database is full [Selected]
In case of database failure the following action syould be taken Repair,Scan,Delete if fails /Repair,Delete if fails /
Archive if fails /Delete(no repair) /Archive(no
repair)
PTZ Preset [Display the [PTZ Preset Positions for Device Name] Window] ( A Page 90)
Presets
Use preset positions from device [Not Selected]
Preset Position on Events
Preset Position on Events [Not Selected]
PTZ Patrolling Settings [Auto PTZ Patrolling] ( A Page 93)
Patrol scheme [My patrol sheme]
PTZ Patrolling Schedule Settings
Stay at each position in the patrol schedule(in seconds) [5]
Time for each PTZ camera movement to complete(in seconds). Motion detection is
disabled during movement. [3]
Motion-Triggered PTZ Patrolling Settings
Disable patrolling schedule if motion is detected [Not Selected]