JVC KY-F1030, Инструкция по эксплуатации

Страница: 44 / 148

E40
Item
AE DISPLAY
FRZ DISPLAY
FRZ CANCEL
TEST PATTERN
LEVEL
When “BAR”/
“IMPULSE”
is selected
MENU RESET
SYSTEM SETTING screen
5. Menu screen settings (continued)
[ ] indicates the factory setting
Set Value
[OFF]
ON
[ON]
OFF
[MANUAL]
AUTO (1s)
AUTO (3s)
AUTO (5s)
OFF
[BAR]
RAMP
IMPULSE
[0.7V]
0.57V
Contents
Used to set whether the ALC, EEI and IRIS values are
displayed on the analog output screen.
OFF:
No on-screen-display
ON: On-screen-display
Used to set whether the “FREEZE” indicator is shown on
the screen at the time of trigger input.
ON:
Displayed
OFF: Not displayed
Sets the method for canceling the FREEZE when the
monitor screen is in FREEZE condition when connection
is made through digital output.
MANUAL : Cancelled by trigger input.
AUTO(1s) : Cancelled after 1 second.
AUTO(3s) : Cancelled after 3 seconds.
AUTO(5s) : Cancelled after 5 seconds.
OFF
: Not cancelled.
* When set to “AUTO” or “OFF”, the displayed screen can
be updated by trigger input during the FREEZE condi-
tion.
Sets the test pattern type output when the function set-
ting switch No.1 <TEST PATTERN> is set to “ON”.
BAR
: “BAR” pattern is output.
RAMP : “RAMP” pattern is output.
IMPULSE : “IMPULSE” pattern is output.
Sets the level of the color signal bar output from the KY-
1030’s [ANALOG OUT] connector.
0.7V:
0.7V test signal is output
0.57V: 0.57V test signal is output
Resets all the set values of menus to the initial values.
page E43, Resetting menu settings