JVC KY-F1030, Инструкция по эксплуатации

Страница: 31 / 148

E27
1/15s
1/8s
1/60s
1/30s
1/250s
1/125s
1/1000s
1/2000s
1/500s
337
395
287
304
277
278
277
277
277
0.203
±
0.063
0.203
±
0.063
0.203
±
0.063
0.203
±
0.063
2.953
±
0.063
0.203
±
0.063
5.953
±
0.063
6.453
±
0.063
4.953
±
0.063
A
B
FREEZE
VD (internal)
EXP (CCD
accumulation
period)
FLASH
ANALOG
OUT
WEN
When the shutter mode is “RANDOM”
• CCD accumulation is performed in sync with the trigger input, and this period is output as the
FLASH signal.
• At the same shutter speeds the delay from the trigger input to the FLASH output is almost
uniform as shown in Table A below. Also, the pulse width of the FLASH output differs with the
shutter speed.
• The trigger input interval is restricted as shown in Table B. Do not input at a shorter
interval than the minimum interval shown in the table.
MEMO
• In the condition where the shutter mode is RANDOM, the image quality may deteriorate at the time of
FREEZE as noise may be applied or white spots may appear.
Shutter
speed
A
Delay [ms]
B
Minimum
trigger
interval [ms]
* In the following situations, the FLASH signal is continuously generated in sync with the CCD
regardless of the external trigger.
●
When [SHUTTER] on the EXPOSURE screen is set to “EEI”.
●
When [GAIN] on the EXPOSURE screen is set to “ALC”.
●
When [IRIS MODE] on the EXPOSURE screen is set to “AUTO”.
●
While AW (Auto White) is operating.