JVC KW-M25BT, Быстрый старт

Страница: 12 / 116

12
Installation
4
Fix a cable with a commercial item of tape.
✎
NOTE
• Swap the clips if necessary.
Ñ
Removing the trim plate
1) Use the extraction key (accessory
3
) to lever out the
four tabs (two on the left part, two on the right part).
3
2) Pull the trim plate forward.
Ñ
Removing the unit
1) Remove the trim plate by referring to step 1 in
“Removing the trim plate”.
2) Insert the extraction key (accessory
2
) deeply into
the slot as shown. (The protrusion at the tip of the
extraction key must face toward the unit.)
2
3) With the inserted extraction key secured, insert the
other extraction key into the slot.
2
4) Pull out the unit halfway.
✎
NOTE
• Be careful to avoid injury from the catch pins on the
extraction key.
5) Pull the unit all the way out with your hands, being
careful not to drop it.
!B5K-0670-00_KWM_K_QSG.indb 12 2019/02/15 11:00