(No.49869)1-5
SECTION 3
DISASSEMBLY
3.1
Main body
3.1.1 Removing the front panel assembly
(See Fig.1)
(1) Press the release button and remove the front panel
assembly.
Fig.1
3.1.2 Removing the bottom cover
(See Fig.2)
• Prior to performing the following procedure, remove the front
panel assembly.
(1) Turn the body upside down.
(2) Insert a screwdriver under the joints to release the two
joints
a
on the left side, the two joints
b
on the right side and
the joint
c
on the back of the body, then remove the bottom
cover from the body.
CAUTION:
When releasing the joint
c
using a screwdriver, do not damage
the board.
Fig.2
3.1.3 Removing the front chassis
(See Fig.3)
• Prior to performing the following procedure, remove the front
panel assembly and bottom cover.
(1) Remove the two screws
A
on each side of the body.
(2) Release the two joints
d
and the two joints
e
on the sides,
then remove the front chassis toward the front.
Fig.3
Front panel assembly
Release button
Bottom cover
Joint
b
Joint
b
Joint
c
Joint
a
Joint
a
Joint
d
Front chassis
A
Joint
e
Joint
d
Joint
e
Содержание KS-FX281
