background image

KD-S34

Installation/Connection Manual
Manual de instalación/conexión

GET0518-002A

[J]

PREPARATIONS

You need the installation kits which corresponds to your car.
•  Mark all the check boxes ( 

 ) to make sure you have follow the instructions and the listed parts.

Check the battery system in your car

Prepare this before installation

1

0607DTSMDTJEIN
EN, SP

© 2007 Victor Company of Japan, Limited

  ENGLISH

  ESPAÑOL

12 V DC, NEGATIVE ground

• 

The fuse blows.

*  Are the red and black leads connected correctly?

• 

Power cannot be turned on.

*  Is the yellow lead connected?

• 

No sound from the speakers.

*  Is the speaker output lead short-circuited?

• 

Sound is distorted.

*  Is the speaker output lead grounded?
*  Are the “–” terminals of L and R speakers grounded in common?

• 

Noise interfere with sounds.

*  Is the rear ground terminal connected to the car’s chassis using shorter and thicker cords?

• 

This unit becomes hot.

*  Is the speaker output lead grounded?
*  Are the “–” terminals of L and R speakers grounded in common?

• 

This unit does not work at all.

*  Have you reset your unit?

TROUBLESHOOTING

I

Handles

E

Washer (ø5)

F

Lock nut (M5)

G

Mounting bolt—
M5 

×

 20 mm (M5 

×

 13/16")

H

Rubber cushion

A

Control panel

B

Sleeve

C

Trim plate

D

Power cord

Parts list for installation and connection

J

Remote controller

K

Battery

When using the optional stay

Install the unit at an angle of 
less than 30˚.

Screw (option)

Stay (option)

Fire wall

Dashboard

*

  Not supplied for this unit.

Flat type screws
—M5 

×

 8 mm (M5 

×

 3/8")

*

Pocket

Flat type screws
—M5 

×

 8 mm (M5 

×

 3/8")

*

Bracket

*

Bracket

*

Removing the unit

In dash-mounting

Before removing the unit, release the rear section.

When installing the unit without using the sleeve 

In a Toyota car for example, first remove the car radio and install the unit in its place.

Do the required electrical 
connections.

Bend the appropriate tabs 
to hold the sleeve firmly 
in place.

When you stand the unit, be careful 
not to damage the fuse on the rear.

INSTALLATION

  If you are not sure how to install this unit correctly, consult your JVC car audio dealer.

Install_EN_KD-S34[J]f.indd   1

Install_EN_KD-S34[J]f.indd   1

6/12/07   8:46:32 AM

6/12/07   8:46:32 AM

Содержание KD-S34

Страница 1: ...eakers grounded in common This unit does not work at all Have you reset your unit TROUBLESHOOTING I Handles E Washer ø5 F Lock nut M5 G Mounting bolt M5 20 mm M5 13 16 H Rubber cushion A Control panel B Sleeve C Trim plate D Power cord Parts list for installation and connection J Remote controller K Battery When using the optional stay Install the unit at an angle of less than 30 Screw option Stay...

Страница 2: ... two speaker system PRECAUTIONS on power supply and speaker connections To external components Connecting the external components A JVC CD changer SIRIUS Satellite radio XM Satellite radio Apple iPod or JVC D player Set CHANGER for the external input setting See page14 of the INSTRUCTIONS For listening to the SIRIUS Satellite radio connect a JVC DLP Down Link Processor separately purchased to this...

Страница 3: ...OCALIZACIÓNDEAVERIAS I Manijas E Arandela ø5 F Tuercade seguridad M5 G Pernodemontaje M5 20mm M5 13 16pulgada H Cojíndegoma A Paneldecontrol B Cubierta C Placadeguarnición D Cordónde alimentación Listadepiezasparainstalaciónyconexión J Controlremoto K Pila Cuandoempleaunsoporteopcional Instalelaunidadaunángulo demenosde30 Tornillo opción Soporte opción Tabiqueaprueba deincendios Tablerode instrume...

Страница 4: ...omponentes externos Conexióndeloscomponentesexternos A CambiadordeCDdeJVC radiosatelitalSIRIUS radiosatelitalXM iPoddeAppleoreproductorJVCD Seleccione CHANGER paraelajustedeentradaexterna Consultelapágina14delMANUALDEINSTRUCCIONES ParaescucharlaradiosatelitalSIRIUS conecteunDLP DownLinkProcessor deJVC adquiridoporseparado alreceptor PuedeconectareliPodoelreproductorD adquiridoporseparado usandouna...

Отзывы: